你的高壓清洗機還是在清洗汽車油漆時水壓過高可能留下劃痕，沖洗磚石縫隙時壓力不足又難以清除頑固污漬嗎。看看CNC高壓清洗機是怎么解決這個問題的

　　Is your high-pressure cleaning machine still capable of leaving scratches when cleaning car paint due to high water pressure, and difficult to remove stubborn stains when washing cracks in bricks and stones due to insufficient pressure. How does the CNC high-pressure cleaning machine solve this problem

　　一、高壓清洗機的核心原理是通過電機驅動水泵，將普通水壓提升至數十甚至數百倍，形成高速水流束沖擊物體表面。但不同材質的“承受力”截然不同：

　　1、 The core principle of a high-pressure cleaning machine is to use an electric motor to drive a water pump, which increases the normal water pressure to tens or even hundreds of times, forming a high-speed water stream that impacts the surface of the object. But the "bearing capacity" of different materials is completely different:

　　金屬表面：如汽車輪轂、工業設備外殼，可承受較高壓力（通常80-150bar），但需避免長期高壓導致鍍層脫落；

　　Metal surfaces, such as car wheels and industrial equipment casings, can withstand high pressures (usually 80-150bar), but long-term high pressure should be avoided to prevent coating detachment;

　　玻璃幕墻：水壓超過60bar可能引發微裂紋，需將壓力控制在40-60bar區間；

　　Glass curtain wall: Water pressure exceeding 60bar may cause microcracks, and the pressure should be controlled within the range of 40-60bar;

　　木質家具：超過30bar的水流可能破壞木材纖維，需以低壓脈沖模式清洗；

　　Wooden furniture: Water flow exceeding 30 bar may damage wood fibers and needs to be cleaned in low-pressure pulse mode;

　　塑料制品：如兒童玩具、戶外家具，20bar以下水壓配合扇形噴嘴更安全。

　　Plastic products, such as children's toys and outdoor furniture, are safer with water pressure below 20 bar and fan-shaped nozzles.

　　智能調節水壓技術的核心，在于讓清洗機“感知”材質特性，并動態調整輸出壓力。這背后涉及多學科交叉創新。

　　The core of intelligent water pressure regulation technology is to enable the cleaning machine to "perceive" material characteristics and dynamically adjust output pressure. This involves interdisciplinary innovation.

　　材質識別：從“肉眼判斷”到“智能感知”

　　Material recognition: from "visual judgment" to "intelligent perception"

　　智能清洗機通過兩種方式實現自動識別：

　　The intelligent cleaning machine achieves automatic recognition through two methods:

　　傳感器陣列：在噴槍或噴嘴處集成壓力傳感器、紅外測溫儀、光譜分析儀，通過檢測表面反光率、溫度變化等參數，快速判斷材質類型。

　　Sensor array: Integrate pressure sensors, infrared thermometers, and spectral analyzers at the spray gun or nozzle to quickly determine the material type by detecting parameters such as surface reflectivity and temperature changes.

　　AI圖像識別：部分高端機型配備攝像頭，結合機器學習算法，可識別木材紋理、金屬光澤等特征，甚至區分汽車不同部位（如漆面、輪轂、玻璃）。

　　AI image recognition: Some high-end models are equipped with cameras, combined with machine learning algorithms, which can recognize features such as wood texture and metallic luster, and even distinguish different parts of the car (such as paint, wheels, and glass).

　　動態調壓：毫秒級響應的“水壓芭蕾”

　　Dynamic pressure regulation: a millisecond level response 'water pressure ballet'

　　識別材質后，清洗機需在毫秒內完成壓力調整。這依賴于：

　　After identifying the material, the cleaning machine needs to complete pressure adjustment within milliseconds. This depends on:

　　變頻電機技術：通過改變電機轉速實時調節水泵輸出，壓力調節范圍可達20-200bar，響應時間＜0.1秒。

　　Variable frequency motor technology: By changing the motor speed to adjust the water pump output in real time, the pressure adjustment range can reach 20-200 bar, and the response time is less than 0.1 seconds.

　　數字液壓閥：采用比例閥或伺服閥替代傳統機械閥，實現水流壓力的連續無級調節，避免壓力突變對材質的沖擊。

　　Digital hydraulic valve: using proportional valves or servo valves instead of traditional mechanical valves to achieve continuous and stepless adjustment of water flow pressure, avoiding the impact of sudden pressure changes on materials.

　　噴嘴適配：從“單一噴頭”到“場景化組合”

　　Nozzle adaptation: from "single nozzle" to "scene based combination"

　　水壓調節需與噴嘴形態配合：

　　Water pressure regulation needs to be coordinated with the nozzle shape:

　　低壓扇形噴嘴：適合大面積平面清洗，如車身、地板；

　　Low pressure fan-shaped nozzle: suitable for large-area flat cleaning, such as car bodies and floors;

　　高壓直射噴嘴：用于頑固污漬攻堅，如油污、銹跡；

　　High pressure direct nozzle: used for tackling stubborn stains such as oil stains and rust;

　　旋轉噴嘴：通過水流自旋產生離心力，提升清洗效率同時降低壓強。

　　Rotating nozzle: generates centrifugal force through the spin of water flow, improving cleaning efficiency while reducing pressure.

　　20220426030525494.png

　　智能清洗機的“材質護理”實踐場景

　　The practical scenario of "material care" for intelligent cleaning machines

　　汽車美容：漆面與輪轂的“差別對待”

　　Car beauty: differential treatment between paint surface and wheel hub

　　二、智能清洗機可自動識別車身不同部位：

　　2.The intelligent cleaning machine can automatically identify different parts of the vehicle body:

　　漆面：采用40bar低壓+扇形噴嘴，配合泡沫清洗劑，避免高壓破壞清漆層；

　　Paint surface: 40bar low pressure+fan nozzle, combined with foam cleaner, to avoid damaging varnish layer under high pressure;

　　輪轂：切換至80bar高壓+旋轉噴嘴，快速溶解剎車粉塵；

　　Wheel hub: Switch to 80bar high pressure+rotating nozzle to quickly dissolve brake dust;

　　玻璃：降至30bar脈沖模式，防止水漬殘留。

　　Glass: Reduce to 30 bar pulse mode to prevent water stains from remaining.

　　建筑維護：石材與幕墻的“安全邊界”

　　Building maintenance: the 'safety boundary' between stone and curtain wall

　　在古建筑修復或玻璃幕墻清洗中：

　　In the restoration of ancient buildings or cleaning of glass curtain walls:

　　大理石表面：以50bar低壓+扇形噴嘴，避免水流滲入石材縫隙導致凍融損傷；

　　Marble surface: Using a 50bar low-pressure and fan-shaped nozzle to prevent water from seeping into the gaps of the stone and causing freeze-thaw damage;

　　Low-E玻璃：采用20bar微水霧模式，防止高壓破壞鍍膜層。

　　Low-E glass: adopts a 20 bar micro water mist mode to prevent high-pressure damage to the coating layer.

　　家居清潔：木質與織物的“溫柔模式”

　　Home Cleaning: The 'Gentle Mode' of Wood and Fabric

　　針對家庭場景的敏感材質：

　　Sensitive materials for home scenes:

　　實木地板：15bar低壓+大扇形噴嘴，模擬人工擦拭力度；

　　Solid wood flooring: 15bar low pressure+large fan-shaped nozzle, simulating manual wiping force;

　　布藝沙發：10bar微壓脈沖，配合吸塵功能，避免織物變形。

　　Fabric sofa: 10bar micro pressure pulse, combined with vacuum function, to avoid fabric deformation.

　　本文由CNC高壓清洗機友情奉獻.更多有關的知識請點擊:http://www.98146.com.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from a high-pressure deburring cleaning machine For more information, please click: http://www.98146.com.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message