Do you know the advantages of ultrasonic cleaning machine?

優點一：清洗效率快，省時間

Advantages 1: fast cleaning efficiency, save time

在玻璃行業領域中，需要清洗的需求相對是比較高的，每天日常生產量比較多，所以清洗的時間對生產行業來說，時間也是成本之一，部分的清洗設備也是無法做到的，而超聲波清洗卻能解決這個問題。

In the field of glass industry, the need for cleaning is relatively high, daily production is more, so the cleaning time for the production industry, time is also one of the costs, part of the cleaning equipment is also unable to do, and ultrasonic cleaning can solve this problem.

優點二：清洗效果好，不殘留

Advantage 2: good cleaning effect, no residue

工業超聲波清洗機設備，不僅它的清洗效率高，清洗效果也是能解決其清洗需求，之所以它能做到這一點，是因為與它的工作原理和清洗方式是密切相關的。

Industrial ultrasonic cleaning equipment, not only its cleaning efficiency is high, but also the cleaning effect can solve its cleaning needs. The reason why it can do this is because it is closely related to its working principle and cleaning method.
               

優點三：節省溶劑，節省清洗成本

Advantage 3: saving solvent and cleaning cost

對于工業超聲波清洗機的清洗方式，添加清洗溶劑只是一個輔助作用，主要緣由與它的工作原理和清洗方式，所以在工作狀態的情況下，所需的添加清洗溶劑的量，比我們人工勞力清洗，或使用其他設備清洗的量還要少而又少。

For the cleaning mode of industrial ultrasonic cleaning machine, adding cleaning solvent is only an auxiliary function. The main reason is its working principle and cleaning mode. Therefore, under the working condition, the amount of cleaning solvent added is less than that of manual cleaning or other equipment cleaning.

優點四：無需人手接觸溶劑，安 全可靠

Advantage 4: no need for human contact with solvent, safe and reliable

清洗時所添加的清洗機溶劑，是無需用人手觸碰的，只需添加到清洗槽內，定好時間開始進行清洗工作即可。

The solvent added to the cleaning machine during cleaning does not need to be touched by human hands. It only needs to be added to the cleaning tank and the cleaning work can be started at a fixed time.

優點五：效果煥然一新，對工件無損傷

Advantage 5: the effect is completely new and there is no damage to the workpiece

使用工業超聲波清洗機進行清洗后，效果會使工件煥然一新，不殘留一點污漬油垢等，而且對工件的表面不會產生一點磨損或者缺陷。

After using the industrial ultrasonic cleaning machine for cleaning, the effect will make the workpiece look brand new, no residual stains, grease, etc., and no wear or defects on the surface of the workpiece.